Configure Slb Global Service-Check - Extreme Networks ExtremeWare Command Reference Manual

configure slb global service-check

configure slb global service-check frequency <seconds> timeout <seconds>
Description
Configures default health checking frequency and timeout period using layer 7-based
application-dependent checking.
Syntax Description
frequency
timeout
Default
The default frequency is 60 seconds.
The default timeout is 180 seconds.
Usage Guidelines
The frequency must be less than the timeout.
If the health check frequency and timeout are not specified for a specific virtual server, the global values
are used. To set specific frequency and timeout values for a virtual server, use the following command:
configure slb vip <vip name> service-check
Shorter intervals require more CPU processing.
Example
The following command sets the service check frequency to 90 seconds and the timeout to 270 seconds:
configure slb global service-check frequency 90 timeout 270
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the frequency of the service check. The range is 15 to 300 seconds.
Specifies the timeout of the service check. The range is 5 to 300 seconds.
configure slb global service-check
469