Commands for Configuring Slots and Ports on a Switch
enable sharing 9 grouping 9-12
The following example defines a load-sharing group that contains ports 9 through 12 on slot 3, ports 7
through 10 on slot 5, and uses the first port on slot 3 as the master logical port 9 on a modular switch:
enable sharing 3:9 grouping 3:9-3:12, 5:7-5:10
In this example, logical port 3:9 represents physical ports 3:9 through 3:12 and 5:7 through 5:10.
History
This command was first available in ExtremeWare 2.0.
The command was modified in ExtremeWare 4.0 to support modular switches.
The command was modified in ExtremeWare 6.0 to support the
parameter.
algorithm
The command was modified in ExtremeWare 7.0.0 to support the
parameter.
dynamic
The command was modified in ExtremeWare 7.1.1 to support cross-module trunking on BlackDiamond
switches.
Platform Availability
This command is available on all platforms.
276
ExtremeWare Software 7.3.0 Command Reference Guide