Extreme Networks ExtremeWare Command Reference Manual page 930

Security Commands
Quiet Period
Client Response Timeout
Default Reauthentication Timeout
Max. Number Authentication Failure
Periodic Reauthentication
---------------------------------
Port: 1:13, Vlan: Default,
MAC IP address
00:B0:D0:90:2F:72 0.0.0.0
-------------------------------
Total Number of Authenticated MACs : 0
The following command shows the detailed Network Login information for the port 1:13 in the VLAN
Default:
show netlogin ports 1:13 "Default"
Following is the output from this command before authentication:
Port: 1:13 Vlan: Default
Port State: Unauthenticated
DHCP: Not Enabled
MAC IP address
------------------------------------------------------------------
00:B0:D0:90:2F:72 0.0.0.0
Quiet Period Timer
------------------------------------------------------------------
Following is the output from this same command after authentication:
Port: 1:13 Vlan: Default
Port State: Unauthenticated
DHCP: Not Enabled
MAC IP address
------------------------------------------------------------------
00:B0:D0:90:2F:72
Quiet Period Timer
------------------------------------------------------------------
History
This command was modified to show the authentication type in ExtremeWare 7.1.0.
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
930
: 60
: 30
: 3600
: 3
: ENABLED
State: Unauthenticated
Auth
No
Auth Type
No 802.1x
: 0 Num. Authentication Failed
Auth Type
0.0.0.0 Yes 802.1x
: 0 Num. Authentication Failed
IP address Auth
secs
secs
secs
Type ReAuth-Timer User
802.1x 12
ReAuth-Timer User
30 Unknown
ReAuth-Timer User
3600 auto20@dot1x.net
Type User
Unknown
: 1
: 0
ReAuth-Timer
ExtremeWare Software 7.3.0 Command Reference Guide