Unconfigure Transceiver-Test Period - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

unconfigure transceiver-test period

unconfigure transceiver-test period
Description
Returns the transceiver test period to the factory default of 12 seconds.
Syntax Description
The command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this feature when the switch can be brought off-line.
Configuring the transceiver test period to 11 seconds or less can affect system performance; therefore,
Extreme Networks does not recommend changing the default transceiver test period. The default is
adequate for most networks.
Example
The following command returns the transceiver test period to 12 seconds:
unconfigure transceiver-test period
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on modular switches only.
756 ExtremeWare Software 7.3.0 Command Reference Guide