Extreme Networks ExtremeWare Command Reference Manual page 815

Hide thumbs Also See for ExtremeWare:

Table of Contents

Dot11 Authentication

The following command sets the authentication and encryption:

configure security-profile secure1 dot11-auth open network-auth wpa encryption aes

This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.

Platform Availability

This command is available on Alpine 3800 series only.

ExtremeWare Software 7.3.0 Command Reference Guide

Network Authentication

configure security-profile dot11-auth network-auth encryption

Extremeware 7.3.0