Extreme Networks ExtremeWare Command Reference Manual page 239

For version 6.1:
• The parameter specifies all ports on the switch.
all
• The
1000
Example
The following example turns autonegotiation off for port 4 (a Gigabit Ethernet port) on a stand-alone
switch:
configure ports 4 auto off duplex full
The following example turns autonegotiation off for slot 2, port 1 on a modular switch:
configure ports 2:1 auto off duplex full
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.1 to support the
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
parameter specifies 1000 Mbps ports.
configure ports auto off
parameter.
all
239