Extreme Networks ExtremeWare Command Reference Manual page 959

unconfigure enhanced-dos-protect rate-limit
The following command resets the rate limiting learn window on ports 2 and 3 to the default value, 10
seconds:
unconfigure enhanced-dos-protect rate-limit learn-window ports 2,3
The following command resets the rate limiting protocol to the default value, ICMP packet types, on
ports 1 through 3:
unconfigure enhanced-dos-protect rate-limit protocol ports 1-3
The following command removes ports 1 through 4 from rate limiting:
unconfigure enhanced-dos-protect rate-limit ports 1-4
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 959