Extreme Networks ExtremeWare Command Reference Manual page 126

Commands for Managing the Switch
• The default groups defined (permanent) are v1v2c_ro for security names snmpv1 and snmpv2c,
v1v2c_rw for security names snmpv1 and snmpv2c, admin for security name admin, and initial for
security names initial, initialmd5, initialsha, initialmd5Priv and initialshaPriv.
• The default access defined (permanent) are admin, initial, v1v2c_ro, v1v2c_rw, and v1v2cNotifyGroup.
Example
In the following command, access for the group defaultROGroup is created with all the default values:
security model , security level
usm
defaultUserView, and storage nonvolatile.
configure snmpv3 add access defaultROGroup
In the following command, access for the group defaultROGroup is created with the values: security
model , security level
USM
view defaultAdminView, and storage nonvolatile.
configure snmpv3 add access defaultROGroup sec-model usm sec-level authnopriv
read-view defaultAdminView write-view defaultAdminView notify-view defaultAdminView
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
126
, read view defaultUserView, no write view, notify view
noauth
, read view defaultAdminView, write view defaultAdminView, notify
authnopriv
ExtremeWare Software 7.3.0 Command Reference Guide