Enable Learning Ports - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

enable learning ports

enable learning ports <portlist>
Description
Enables MAC address learning on one or more ports.
Syntax Description
portlist
Default
Enabled.
Usage Guidelines
On a modular switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
Example
The following command enables MAC address learning on ports 7 and 8 on a stand-alone switch:
enable learning ports 7,8
The following command enables MAC address learning on slot 1, ports 7 and 8 on a modular switch:
enable learning ports 1:7-8
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
Platform Availability
This command is available on all platforms.
270
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
can be a list of slots and ports. On a stand-alone switch,
<portlist>
ExtremeWare Software 7.3.0 Command Reference Guide