Show Session - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show session

show session
Description
Displays the currently active Telnet, console, and web sessions communicating with the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The command displays the username and IP address of the incoming Telnet session,
show session
whether a console session is currently active, and the login time.
The following table displays the
Table 8: Show Command Field Definitions
Field Definition
# Indicates session number.
Login Time Indicates login time of session.
User Indicates the user logged in for each session.
Type Indicates the type of session.
Auth Indicates how the user is logged in.
CLI Auth Indicates the type of authentication (RADIUS and TACAS) if enabled.
Location Indicates the location (IP address) from which the user logged in.
Example
The following command displays the active sessions on the switch:
show session
Following is the output from this command:
# Login Time
==============================================================================
0 Tue Feb 19 18:08:42 2002 admin
5 Thu Feb 21 19:09:48 2002 admin
* 1028 Thu Feb 21 18:56:40 2002 admin
198
command field definitions.
show session
User Type
console
http
telnet
Auth CLI Auth Location
local disabled serial
local disabled 10.0.4.76
local disabled 10.0.4.19
ExtremeWare Software 7.3.0 Command Reference Guide