configure flowstats export delete port
configure flowstats export <group#> delete [<ipaddress> | <hostname>]
<udp_port>
Description
Removes a flow-collector device from an export group to which NetFlow datagrams are exported.
Syntax Description
group#
ipaddress
hostname
udp_port
Default
N/A.
Usage Guidelines
See Chapter 22 for information on a similar command for the PoS module (BlackDiamond switch only).
Example
The following command removes the flow-collector device with IP address 10.205.30.15 using UDP port
2025 from export group 5 on this switch:
configure flowstats export 5 delete 10.205.30.15 2025
History
This command first available in ExtremeWare 6.2 for "i" series platforms.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the export group to which the specified flow-collector device belongs.
The group number is an integer in the range of 1-32.
Specifies the IP address of the flow-collector destination.
Specifies the host name of the flow-collector destination.
Specifies a UDP port of the destination flow-collector.
configure flowstats export delete port
613