Enable Slb Vip Service-Check - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

SLB Commands

enable slb vip service-check

enable slb vip [all | <vip name>] service-check

Enables layer 7 service check.

Syntax Description

Service-check is disabled by default.

Usage Guidelines

The service checks are based on the following information:

• If a service check is already configured, then it will use the configured service-checking information.

• If a service-check is configured for a TCP port number (instead of for a service), ExtremeWare

assigns the service based on the port number (if the port number is well known) and uses the global

default parameters.

To disable service-check, use the following command:

disable slb vip service-check

The following command enables service-check for the virtual server "ftp_vip":

enable slb vip ftp_vip service-check

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all platforms.

Specifies all virtual servers.

Specifies a virtual server.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0