Configure Slb Gogo-Mode Service-Check Telnet - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands

configure slb gogo-mode service-check telnet

configure slb gogo-mode <port number> service-check telnet {L4-port
<L4-port>} {user <user name> | password {encrypted} <password>}
Description
Configures the service check parameters for a GoGo mode group.
Syntax Description
port number
L4-port
user
password
encrypted
Default
The default value for user and password is anonymous.
Usage Guidelines
Before you use this command, configure the IP address on the GoGo mode servers using the following
command:
configure slb gogo-mode health-check
To enable service check for a GoGo mode group, use the following command:
enable slb gogo-mode <port number> service-check
To disable service check for a GoGo mode group, use the following command:
disable slb gogo-mode <port number> service-check
Example
The following command configures GoGo mode service check for the group with port 29 as the master
port to login using the user name "service" and the password "check":
configure slb gogo-mode 29 service-check telnet user service password check
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
482
Specifies the GoGo mode master port.
Specifies a layer 4 port.
Specifies the user name that is checked.
Specifies the password for the user name.
Encrypts the password stored in the configuration file.
ExtremeWare Software 7.3.0 Command Reference Guide