Extreme Networks ExtremeWare Command Reference Manual page 595

Following is the output from this command:
Name
ratio_vip
rr_vip
Modes: TP - Transparent,
Automatically Exported via: PA - Proxy Arp, HR - Host Route, SR - Subnet Route
Flags: E - Enable,
P - Persistence,
! - VLAN has not been configured with "slb-type"
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
IP Address Port -- Mode --
4.1.1.100 80
10.1.1.10 80
TL - Translational,
U - Up, A - Active Unit,
S - Sticky, R - SvcDown-Reset,
Unit Export # Servers
FlagsPool
1 TL SR EUA-----ratio_po0/3
1 TP PA EUA----!rr_pool0/3
PT - Port Translational
H - Health-Check Enabled,
show slb vip
Up/Defined
595