Clear Log Diag Remap - Extreme Networks ExtremeWare Command Reference Manual

clear log diag remap

clear log diag remap
clear log diag remap <slot number>
Description
Clears the packet memory diagnostics failures from the EEPROM.
Syntax Description
slot number Specifies the slot where the I/O module is installed.
Default
N/A.
Usage Guidelines
Use this command only at the direction of Extreme Networks personnel. Extreme Networks support
personnel can clear the packet memory diagnostics failures from the EEPROM using the following
command:
clear log diag remap <slot number>
This command clears any error remapping.
Example
The following command clears the packet memory diagnostics failures from the EEPROM for the
module in slot 5:
clear log diag remap 5
History
This command was first available in ExtremeWare 7.2.0b25.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 609