Extreme Networks ExtremeWare Command Reference Manual page 241
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
configure ports auto on
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.1 to support the
parameter.
all
This command was modified in ExtremeWare 4.0 to support modular switches.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
241
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeSwitching X460-G2-24p-10GE4