Extreme Networks ExtremeWare Command Reference Manual page 350

VLAN Commands
Priority: 802.1P Priority 7
IP: 10.222.0.2/255.255.255.0
STPD: s0(Disabled,Auto-bind)
Protocol: Match all unfiltered protocols.
Loopback: Disable
RateShape: Disable
QosProfile:QP1
QosIngress:IQP1
Ports: 5.
Flags: * - Active, ! - Disabled
B - BcastDisabled, R - RateLimited, L - Loopback
(g) Load Share Group, (c) Cross Module Trunk
Untag: *1:25
Tagged: *5:4c
History
This command was first available in ExtremeWare 1.0.
This command was modified to support longer VLAN names in ExtremeWare 6.2.2.
This command was modified to include the Member of STP Domain flag in ExtremeWare 7.0.
This command was modified to support the
This command was modified to include the cross-module trunk flag in ExtremeWare 7.1.1
The output of this command was changed to accommodate the multinetting feature by including
secondary IP addresses. This modified command was made available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
350
(Number of active ports=4)
5:10 5:25 7:25
"3" series modules in ExtremeWare 7.0.1.
ExtremeWare Software 7.3.0 Command Reference Guide