Configure Slb Global Connection-Timeout - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
SLB Commands
configure slb global connection-timeout
configure slb global connection-timeout <seconds>
Description
Configures the connection timeout for transparent and translation modes.
Syntax Description
seconds
Specifies the number of seconds. The range is 1 to 180.
Default
The default is one second.
Usage Guidelines
None.
Example
The following command configures the connection timeout for 50 seconds:
configure slb global connection-timeout 50
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
460
ExtremeWare Software 7.3.0 Command Reference Guide
Advertisement
Table of Contents
