Extreme Networks ExtremeWare Command Reference Manual page 389

configure qosprofile
For ExtremeWare 4.0:
• Only four priority levels are available (low, normal, medium, and high).
Example
The following command configures the QoS profile parameters of QoS profile qp5 for specific ports on
an "i" series switch:
configure qosprofile qp5 minbw 10% maxbw 80% priority highHi ports 5-7
The following command configures the buffer size for QoS profile qp5 on an "i" series switch:
configure qosprofile qp5 minbw 10% maxbw 80% priority highhi minbuf 3% maxbuff 1024K
History
This command was available in ExtremeWare 2.0.
The minbuff, maxbuff, and ports arguments were available in ExtremeWare 6.0.
Platform Availability
The basic command is available on all platforms.
The minbuff, maxbuff, and ports arguments are available on "i" series platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 389