SLB Commands
Password: (not shown)
SMTPDomain: "mydomain.com"
NNTP Newsgroup: "ebusiness"
User: anonymous
Password: (not shown)
POP3User: anonymous
Password: (not shown)
#
#
SLB Failover Configuration:
Failover: Enabled
Local unit ID: 1
Local IP address: 10.1.1.1
Remote IP address: 10.1.1.2
TCP port number: 1028
Remote Alive frequency: 1
Remote Dead frequency: 2
Keepalive Timeout: 3
Ping check: Disabled
Ping check IP address: 0.0.0.0
Ping frequency: 1
Ping timeout: 3
Manual failback: Disabled
#
#
SLB Failover Status: Running
Units active in local SLB: 2
Units active in or
requested by remote SLB: None
Send connection: Down
Receive connection: Down
Ping check: Not Running
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
586
ExtremeWare Software 7.3.0 Command Reference Guide