Extreme Networks ExtremeWare Command Reference Manual page 55

Hide thumbs Also See for ExtremeWare:

Table of Contents

This preface provides an overview of this guide, describes guide conventions, and lists other

publications that may be useful.

Introduction

This guide provides the complete syntax for all the commands available in the currently-supported

versions of the ExtremeWare

Extreme Networks

MPLS or PoS modules.

This guide is intended for use as a reference by network administrators who are responsible for

installing and setting up network equipment. It assumes knowledge of Extreme Networks switch

configuration. For conceptual information and guidance on configuring Extreme Networks switches, see

the ExtremeWare Software User Guide for your version of the ExtremeWare software.

When features, functionality, or operation is specific to a modular or stand-alone switch family, the

family name is used. Explanations about features and operations that are the same across all product

families simply refer to the product as the "switch."

and list conventions that are used throughout this guide.

Table 1: Notice Icons

ExtremeWare Software 7.3.0 Command Reference Guide

software running on either modular or stand-alone switches from

. This also includes commands that support specific modules such as the ARM,

Alerts you to...

Important features or instructions.

Risk of personal injury, system damage, or loss of data.

Extremeware 7.3.0