Configure Snmpv3 Add Notify - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add notify

configure snmpv3 add notify {hex} <notify name> tag {hex} <tag> {volatile}
Description
Add an entry to the snmpNotifyTable.
Syntax Description
hex
notify name
tag
volatile
Default
The default storage type is non-volatile.
Usage Guidelines
Use this command to add an entry to the snmpNotifyTable. When a notification is to be sent, this table
is examined. For the target addresses that have been associated with the tags present in the table,
notifications will be sent, based on the filters also associated with the target addresses.
Example
Use the following command to send notification to addresses associated with the tag type1:
configure snmpv3 add notify N1 tag type1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
134
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the notify name to add.
Specifies a string identifier for the notifications to be sent to the target.
Specifies volatile storage.
ExtremeWare Software 7.3.0 Command Reference Guide