Configure Mpls Delete Tls-Tunnel - Extreme Networks ExtremeWare Command Reference Manual

configure mpls delete tls-tunnel

configure mpls delete tls-tunnel [<tunnel_name> | group <groupid> | all]
Description
Deletes one or all TLS tunnels.
Syntax Description
tunnel_name
group <groupid>
all
Default
N/A
Usage Guidelines
This command deletes the TLS tunnel with the specified tunnel name. Specify the
want to delete all TLS tunnels belonging to a specific group. Specify the
delete all TLS tunnels belonging to a specific group. Use the
Example
The following command deletes the TLS tunnel rt40:
configure mpls delete tls-tunnel rt40
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare 7.7 Command Reference Guide
Specifies a TLS tunnel name.
Specifies a group identifier
Specifies all TLS tunnels.
configure mpls delete tls-tunnel
<groupid>
if you want to
<groupid>
keyword to delete all TLS tunnels.
all
if you
2509