Extreme Networks ExtremeWare Command Reference Manual page 339

Version 7.7
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

— Flooding
— QoS profiles
— ELSM status, if configured
If you do not specify a port number or range of ports, detailed system-related information is displayed
for all ports. The data is displayed in a table format.
On a modular switch,
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
This status information may be useful for your technical support representative if you have a network
problem.
For version 6.0 and later: The
The data is called out with written explanations versus displayed in a table format.
For version 6.2.2 and later: The detailed output displays a link filter counter. The link filter counter is
calculated at the middle layer on receiving an event. The link filter up indicates the number of link
transitions from down to up at the middle layer filter. The link filter down indicates the number of link
transitions from up to down at the middle layer filter.
NOTE
If you telnet to the switch and use the show ports info detail command, the line feeds might not be
recognized, resulting in output lines overwriting previous lines.
Example
The following command displays port system-related information:
show ports info
Following is sample output from this command:
Port
2:1
2:2
2:3
2:4
2:5
2:6
iL2_7
iL2_8
iL2_9
iL2_10
iL2_11
iL2_12
iL2_13
iL2_14
3:1
3:2
3:3
3:4
ExtremeWare 7.7 Command Reference Guide
can be a list of slots and ports. On a stand-alone switch,
<portlist>
detail
Diag
Flags
Link
State
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------E ready
P e--m-------E ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------D ready
P e--m-------E ready
P e--m-------E ready
P e--m-------E ready
P e--m-------E ready
parameter is used to provided more specific port information.
Link Num Num
Num
UPs
STP VLAN Proto Size
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
0
1
1
0
1
1
Jumbo QOS
Load
Profile Mast
0
9216
0
9216
0
9216
0
9216
1
9216
1
9216
0
9216
0
9216
0
9216
0
9216
0
9216
0
9216
0
9216
0
9216
1
9216
1
9216
1
9216
1
9216
show ports info
<portlist>
339

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.7

Table of Contents