Holding and Storing T1600 FPCs
Holding T1600 FPCs
Copyright © 2010, Juniper Networks, Inc.
Holding T1600 FPCs on page 161
Storing T1600 FPCs on page 165
Preventing Damage to FPCs on page 161
Holding T1600 FPCs Vertically on page 163
Holding T1600 FPCs Horizontally on page 164
Preventing Damage to FPCs
CAUTION: Many components on the FPC are fragile. Failure to handle FPCs
as specified in this document can cause irreparable damage.
CAUTION: To prevent damage when handling or carrying FPCs:
As you carry the FPC, do not bump it against anything. FPC components
are fragile.
Do not grasp the FPC anywhere except places that this document indicates.
In particular, never grasp the connector edge, especially at the power
connector in the corner where the connector and bottom edges meet (see
Figure 96 on page 162).
Do not carry the FPC by the faceplate with only one hand (see Figure 97
on page 162).
Do not rest any edge of an FPC directly against a hard surface (see Figure
98 on page 163). If you must rest the FPC temporarily on an edge while
changing its orientation between vertical and horizontal, use your hand as
a cushion between the edge and the surface.
Chapter 15: Maintaining T1600 Router Hardware Components
161