T1600 Core Router Hardware Guide
Related
Documentation
38
NOTE: For specific information about Routing Engine components (for
example, the amount of DRAM), issue the
command.
The ports for connecting the Routing Engine to external management devices are located
on the Connector Interface Panel (CIP).
NOTE: If two Routing Engines are installed, they must both be the same
hardware model.
The T1600 router supports these Routing Engines:
RE-600 is supported in Junos OS Release 8.5 and later.
RE-1600 is supported in Junos OS Release 8.5 and later.
RE-2000 is supported in Junos OS Release 8.5 and later.
RE-C1800 is supported in Junos OS Release 9.6R2 and later.
NOTE: The RE-C1800 is required for connection to a TX Matrix Plus router.
T1600 RE-600 Description on page 38
T1600 RE-1600 Description on page 40
T1600 RE-2000 Description on page 42
T1600 RE-C1800 Description on page 43
T1600 RE-600 Description
The RE-600 boots from the storage media in this order: the PC Card (if present), then
the CompactFlash card (if present), then the hard disk.
Figure 23: Routing Engine 600
show chassis routing-engine
Copyright © 2010, Juniper Networks, Inc.