T1600 Db-9 Connector Pinouts For The Routing Engine Auxiliary And Console Ports - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

T1600 DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE Ports

372
The ports on the CIP labeled
RS-232 (EIA-232) cable. The
modem, or other auxiliary unit, and the
console. The ports are configured as data terminal equipment (DTE).Table 58 on page 372
describes the DB-9 connector pinouts.
Table 58: DB-9 Connector Pinouts
Pin Signal
1 DCD
2 RxD
3 TxD
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 RING
and
AUXILIARY CONSOLE
port connects the Routing Engine to a laptop,
AUXILIARY
CONSOLE port connects it to a management
Direction Description
<– Carrier Detect
<– Receive Data
–> Transmit Data
–> Data Terminal Ready
— Signal Ground
<– Data Set Ready
–> Request To Send
<– Clear To Send
<– Ring Indicator
are DB-9 receptacles that accept
Copyright © 2010, Juniper Networks, Inc.