Juniper T1600 Hardware Manual page 183

Copyright © 2010, Juniper Networks, Inc.
Remove the dust cap from the cleaning tool.
7.
Insert the tip of the dry cloth cleaning tool into the cleaning adapter (see Figure 93
8.
on page 159).
Figure 93: Inserting the Cleaning Adapter into the Fiber-Optic Array Port
and the Cleaning Tip into the Keyed Slot of the Cleaning Adapter
Fiber-Optic Array Connector
Cleaning tool adapter
NOTE: This illustration shows TXP-F13 SIBs on a TX Matrix Plus router.
However, the method for inserting the cleaning tool adapter and cleaning
tool is the same for the TXP-T1600 SIB.
NOTE: The cleaning adapter is keyed to ensure that the cleaning tip can
be inserted in only one way.
Rotate the thumb wheel in the direction indicated on the cleaning tool until the thumb
9.
wheel clicks to indicate a completed cleaning action (see Figure 94 on page 160).
Chapter 15: Maintaining T1600 Router Hardware Components
Cleaning tool
159