Unpacking The T1600 Router; Overview Of Unpacking The T1600 Router; Tools And Parts Required To Unpack The T1600 Router - Juniper T1600 Hardware Manual

CHAPTER 6

Unpacking the T1600 Router

Overview of Unpacking the T1600 Router

Tools and Parts Required to Unpack the T1600 Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Overview of Unpacking the T1600 Router on page 79
Tools and Parts Required to Unpack the T1600 Router on page 79
Unpacking the T1600 Router on page 80
Verifying the T1600 Router Parts Received on page 81
To unpack the router:
Gather the tools required to unpack the router.
1.
See "Tools and Parts Required to Unpack the T1600 Router" on page 79.
Unpack the router.
2.
See "Unpacking the T1600 Router" on page 80.
Verify that all parts have been received.
3.
See "Verifying the T1600 Router Parts Received" on page 81.
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Overview of Unpacking the T1600 Router on page 79
Unpacking the T1600 Router on page 80
Clearance Requirements for Airflow and T1600 Hardware Maintenance on page 77
79