T1600 Craft Interface Sib Leds; T1600 Craft Interface Fpc Leds - Juniper T1600 Hardware Manual

Related
Documentation

T1600 Craft Interface SIB LEDs

Related
Documentation

T1600 Craft Interface FPC LEDs

Copyright © 2010, Juniper Networks, Inc.
T1600 Host Subsystem Description on page 36
T1600 Craft Interface Description on page 51
T1600 T-CB LEDs on page 47
T1600 RE-600 LEDs on page 39
T1600 RE-1600 LEDs on page 41
T1600 RE-2000 LEDs on page 43
Replacing T1600 Host Subsystem Components on page 213
Each SIB has two LEDs on the craft interface that indicate its status. The SIB LEDs, labeled
through , are located on the upper right of the craft interface. The
SIB0 SIB4
is not replicated on the craft interface. Table 17 on page 55 describes the functions of the
SIB LEDs.
Table 17: SIB LEDs on the Craft Interface
Label Color
Red
FAIL
Green
OK
T1600 Switch Interface Board (SIB) Description on page 32
T1600 Craft Interface Description on page 51
Maintaining the T1600 SIBs on page 168
Replacing a T1600-SIB on page 230
Each FPC slot has two LEDs that indicate its status. The FPC LEDs, labeled
, are located along the bottom of the craft interface. Table 18 on page 55 describes
FPC7
the functions of the FPC LEDs.
Table 18: FPC LEDs
Label Color
Red
FAIL
Green
OK
Chapter 3: T1600 Router Hardware Components Overview
State Description
On steadily SIB has failed.
On steadily SIB is functioning normally.
State Description
On steadily FPC has failed.
On steadily FPC is functioning normally.
Blinking FPC is starting up.
LED
ACTIVE
FPC0 through
55