Replacing The T1600 Front Air Filter; Removing The T1600 Front Air Filter - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

Replacing the T1600 Front Air Filter

206
Figure 109: Installing the Rear Fan Tray
Removing the T1600 Front Air Filter on page 206
1.
Installing the T1600 Front Air Filter on page 207
2.

Removing the T1600 Front Air Filter

The front air filter, located below the FPC card cage in the front of the chassis, and installs
horizontally. The front air filter weighs approximately 1 lb (0.5 kg).The air filters are
hot-insertable and hot-removable.
To remove the front air filter (see Figure 110 on page 207):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Unwrap any PIC cables from the spools on the cable management system, and remove
2.
the cables from the tray. Arrange the cables so that they do not block the front of the
Copyright © 2010, Juniper Networks, Inc.