T1600 Ac Power Cord Specifications - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide
Related
Documentation

T1600 AC Power Cord Specifications

Table 54: Three-Phase Delta and Wye AC Power Cord Specifications
Country
Europe
North America
360
1774 W + 384 W + 35 W = 2193 W
Example of calculating typical power consumption for maximum configuration:
Base System + 8 T1600-Type 4 FPCs + 1 LCC-CB + 1 RE-C1800 + 1 SCG + 16 PICs + 5
(TXP-T1600 SIBs – T1600 SIBs) + fan tray (full speed – normal speed) =
1774 W + 8 (638 W) + 56 W + 96 W + 11 W + 16 (186 W) + 5(232 W —203 W) + 864 W
=
1774 W + 5104 W + 56 W + 96 W +11 W + 2976 W + 145 W + 864 W + 91 W= 11,026 W
Example of calculating system thermal output:
Watts DC/0.293 = BTU/hr
11,117/0.293 = 37.631 BTU/hr
T1600 Power System Description on page 59
Connecting AC Power to a T1600 Router with Three-Phase Delta AC Power Supplies
on page 138
Connecting AC Power to a T1600 Router with Three-Phase Wye AC Power Supplies
on page 140
T1600 AC Power Electrical Safety Guidelines on page 339
T1600 AC Power Cord Specifications on page 360
Most sites distribute power through a main conduit that leads to frame-mounted power
distribution panels, one of which can be located at the top of the rack that houses the
router. An AC power cord connects each power supply to the power distribution panel.
Each AC power supply has a metal wiring compartment that contains the AC terminal
block and ground labeled
GND
labeled , , , and , from left to right. The delta AC terminal block consists of three
L1 L2 L3 N
input terminals labeled L1 ,
Detachable AC power cords, each 4.5 m (approximately 14.8 ft) long, are supplied with
the router. The AC power cord wires insert into the AC input terminals in the AC terminal
block by screwdriver. The plug end of the power cord fits into the power source receptacle
for your geographical location.
Table 54 on page 360 provides specifications and Figure 191 on page 361 and Figure 192 on
page 361 depict the plug on the AC power cord provided for each region supported.
Electrical
Model Number Specification
CBL-T-PWR-STR-WYE 32 A, 400 VAC
CBL-T-PWR-STR-DEL T A 60 A, 250 VAC
. The wye AC terminal block consists of four input terminals
L2 , and L3 , from left to right.
Plug Type
IEC 60309
IEC 60309
Plug Color
Red
Blue
Copyright © 2010, Juniper Networks, Inc.