Grounding The T1600 Router; Tools And Parts Required To Ground The T1600 Router; Connecting The T1600 Grounding Cable - Juniper T1600 Hardware Manual

CHAPTER 11

Grounding the T1600 Router

Tools and Parts Required to Ground the T1600 Router

Related
Documentation

Connecting the T1600 Grounding Cable

Copyright © 2010, Juniper Networks, Inc.
Tools and Parts Required to Ground the T1600 Router on page 125
Connecting the T1600 Grounding Cable on page 125
To ground the router, you need:
Grounding cable (which you must provide)
Grounding lug (provided with the router)
M6 screws or UNC 1/4-20 screws
Electrostatic discharge (ESD) grounding wrist strap
T1600 Chassis Description on page 14
T1600 Chassis Grounding Cable and Lug Specifications on page 362
T1600 Preventing Electrostatic Discharge Damage on page 312
You ground the router by connecting a grounding cable to earth ground and then attaching
it to the chassis grounding points using two screws. You must provide the grounding
cable (the cable lugs are supplied with the router).
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Make sure that grounding surfaces are clean and brought to a bright finish before
2.
grounding connections are made.
Connect the grounding cable to a proper earth ground.
3.
Verify that a licensed electrician has attached the cable lug provided with the router
4.
to the grounding cable.
Make sure that grounding surfaces are clean and brought to a bright finish before
5.
grounding connections are made.
125