Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Figure 106: Removing an Upper Front Fan Tray
Installing T1600 Standard Upper Front Fan Tray
To install an upper front fan tray (see Figure 107 on page 203):
Attach an electrostatic discharge (ESD) grounding strap to your and connect the strap
1.
to one of the ESD points on the chassis. For more information about ESD, see "T1600
Preventing Electrostatic Discharge Damage" on page 312.
Grasp the fan tray by its handles and insert it straight into the chassis.
2.
Tighten the captive screws on each side of the fan tray faceplate to secure it in the
3.
chassis.
Figure 107: Installing an Upper Front Fan Tray
T1600 Cooling System Description on page 69
Troubleshooting the T1600 Cooling System on page 182
Clearance Requirements for Airflow and T1600 Hardware Maintenance on page 77
Maintaining the T1600 Fan Trays on page 153
Chapter 17: Replacing T1600 Router Hardware Components
203