T1600 Core Router Hardware Guide
Removing the Spacer Bars
Related
Documentation
92
Figure 55: Removing the Center-Mounting Bracket
The router is shipped with each spacer bar attached to the rear of each front-mounting
flange. If you are installing the chassis in an open-frame rack, removing the spacer bars
is optional.
To remove the spacer bars:
Remove the screws that fasten the spacer bar to the front-mounting flange
1.
Remove the spacer bars.
2.
T1600 Router Description on page 3
Overview of Installing the T1600 Router on page 73
T1600 Site Preparation Requirements Checklist on page 75
Copyright © 2010, Juniper Networks, Inc.