Reinstalling the T1600 Front Cable Management System
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Figure 81: Reinstalling a Front Fan Tray
To reinstall the front cable management system:
Position the front cable management system on the studs on the lower front of the
1.
chassis.
Insert the nuts through the holes in the cable management system onto the studs on
2.
the chassis.
Using a 3/8-in. nut driver, tighten the nuts securely.
3.
Overview of Installing the T1600 Router on page 73
Overview of Installing a T1600 Router Without a Mechanical Lift on page 101
Removing Components from the T1600 Chassis on page 102
T1600 Preventing Electrostatic Discharge Damage on page 312
Chapter 10: Installing the T1600 Router Without a Mechanical Lift
123