Txp-T1600 Sib Leds - Juniper T1600 Hardware Manual

TXP-T1600 SIB LEDs

Copyright © 2010, Juniper Networks, Inc.
Table 6 on page 35 describes the functions of the T1600-SIB LEDs. If all three LEDs are
off, the SIB is not receiving power. The craft interface has three additional LEDs that show
the status of each SIB.
Table 6: TXP-T1600 SIB LEDs
Label Color
ACTIVE Green
OK Green
Yellow
FAIL
The port LEDs—labeled A ,
SIB. Figure 22 on page 35 shows the port LEDs. Table 7 on page 36 describes the functions
of these LEDs.
Figure 22: TXP-T1600 SIB Port LEDs
Chapter 3: T1600 Router Hardware Components Overview
State Description
On steadily SIB is in active mode.
On steadily SIB is functioning normally.
Blinking SIB is starting up.
On steadily SIB has failed.
B , C , D —are located in the upper left corner of the TXP-T1600
35