Powering On The Ac-Powered T1600 Router - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide
Related
Documentation

Powering On the AC-Powered T1600 Router

142
T1600 Three-Phase Delta and Wye AC Power Supply Overview on page 65
Powering On the AC-Powered T1600 Router on page 142
T1600 General Electrical Safety Guidelines on page 330
T1600 AC Power Electrical Safety Guidelines on page 339
T1600 AC Power Cord Specifications on page 360
T1600 Preventing Electrostatic Discharge Damage on page 312
You can use this procedure for a router with either three-phase delta AC power supplies
or three-phase wye AC power supplies. To power on the AC-powered router:
Verify that the power supplies are fully inserted in the chassis and that the captive
1.
screws on their faceplates are tightened.
Verify that the AC power cords are connected correctly.
2.
Verify that an external management device is connected to one of the Routing Engine
3.
ports on the CIP ( AUXILIARY
NOTE: The management Ethernet port will not be functional until you
have completed the initial configuration.
Turn on the power to the external management device.
4.
Switch on the dedicated customer site circuit breakers to provide power to the AC
5.
power cables. Follow your site's procedures.
Verify that the AC OK LED on both AC power supply faceplates are lit steadily green,
6.
indicating that the power supplies are receiving power.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
7.
the strap to one of the ESD points on the chassis.
Switch the power switch on one of the power supplies to the
8.
LED blinks momentarily, then lights steadily.
OK
NOTE: After a power supply is powered on, it can take up to 60 seconds
for status indicators—such as the output status LEDs on the power supply,
the command output, and messages on the LCD on the craft interface—to
indicate that the power supply is functioning normally. Ignore error
indicators that appear during the first 60 seconds.
or CONSOLE ).
Copyright © 2010, Juniper Networks, Inc.
ON position ( | ). The DC