Installing A Front Air Filter Element On A T1600 Ac Or Dc Power Supply - Juniper T1600 Hardware Manual

Copyright © 2010, Juniper Networks, Inc.
Figure 181: Removing a Front Air Filter Element

Installing a Front Air Filter Element on a T1600 AC or DC Power Supply

To install a power supply front filter element (see Figure 182 on page 301:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Install a new filter element.
2.
Press the filter cover straight onto the power supply faceplate until all four sides click
3.
into place.
Figure 182: Installing a Front Air Filter Element
Chapter 17: Replacing T1600 Router Hardware Components
301