Providing Power To The T1600 Router; Tools And Parts Required To Provide Power To The T1600 Router - Juniper T1600 Hardware Manual

CHAPTER 13

Providing Power to the T1600 Router

Tools and Parts Required to Provide Power to the T1600 Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Tools and Parts Required to Provide Power to the T1600 Router on page 133
Connecting DC Power to the T1600 Router on page 134
Powering On the DC-Powered T1600 Router on page 136
Connecting AC Power to a T1600 Router with Three-Phase Delta AC Power
Supplies on page 138
Connecting AC Power to a T1600 Router with Three-Phase Wye AC Power
Supplies on page 140
Powering On the AC-Powered T1600 Router on page 142
Powering Off the T1600 Router on page 143
DC-powered routers: 7/16-in. (11 mm) hexagonal-head external drive nut driver, with
a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts
to terminal studs on each power supply on a DC-powered router.
CAUTION: You must use an appropriate torque-controlled tool to tighten
the nuts. Applying excessive torque damages the terminal studs and the
power supply. The absolute maximum torque that may be applied to this
nut is 45 in-lb (5.0 Nm).
AC-powered router:
Phillips (+) screwdriver, number 2 to access the metal AC wiring compartment
1/4-in. slotted screwdriver to attach the ground wire and input terminal wires of the
AC power cord.
Electrostatic discharge (ESD) grounding wrist strap
T1600 Preventing Electrostatic Discharge Damage on page 312
T1600 General Electrical Safety Guidelines on page 330
T1600 DC Power System Electrical Specifications on page 349
133