General Safety Guidelines And Warnings; General Safety Guidelines For M Series, Mx Series, And T Series Routers - Juniper T1600 Hardware Manual

Related
Documentation

General Safety Guidelines and Warnings

General Safety Guidelines for M Series, MX Series, and T Series Routers

Copyright © 2010, Juniper Networks, Inc.
måste du vara medveten om farorna med elkretsar och känna till vanligt
förfarande för att förebygga skador.
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 309
General Safety Warnings for M Series, MX Series, and T Series Routers on page 310
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 309
General Safety Warnings for M Series, MX Series, and T Series Routers on page 310
T1600 Preventing Electrostatic Discharge Damage on page 312
The following guidelines help ensure your safety and protect the router from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in this documentation. Make sure that
only authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Operate the router only when it is properly grounded.
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this documentation. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Appendix A: T1600 Router Safety and Regulatory Compliance Information
309