Removing The Center-Mounting Brackets From The Chassis - Juniper T1600 Hardware Manual

Removing the Center-Mounting Brackets from the Chassis

Copyright © 2010, Juniper Networks, Inc.
Figure 54: Installing the Mounting Hardware for an Open-Frame Rack
Before front-mounting the router in an open-frame rack, you must remove the
center-mounting brackets from the chassis.
To remove the center-mounting brackets (see Figure 55 on page 92):
Loosen the screws at the top and bottom of each bracket.
1.
Remove each bracket.
2.
Chapter 7: Installing the T1600 Router Mounting Hardware
91