T1600 Core Router Hardware Guide
Reinstalling T1600 Front Fan Trays
122
Figure 80: Reinstalling an FPC
To reinstall the standard front fan trays (see Figure 81 on page 123):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Grasp one of the fan trays by its handles and insert it straight into the chassis.
2.
Tighten the captive screw on each side of the fan tray faceplate to secure it in the
3.
chassis.
Repeat the procedure to reinstall the remaining fan tray.
4.
Copyright © 2010, Juniper Networks, Inc.