T1600 Core Router Hardware Guide
Related
Documentation
T1600 Connector Interface Panel (CIP) Overview
T1600 Connector Interface Panel (CIP) Overview
56
T1600 Flexible PIC Concentrator (FPC) Description on page 18
T1600 Craft Interface Description on page 51
Maintaining T1600 FPCs on page 156
Troubleshooting the T1600 FPCs on page 184
Replacing a T1600 FPC on page 237
T1600 Connector Interface Panel (CIP) Overview on page 56
T1600 Alarm Relay Contacts on page 58
T1600 Connector Interface Panel (CIP) Description on page 56
Routing Engine Ports on page 57
T1600 Alarm Relay Contacts on page 58
T1600 Connector Interface Panel (CIP) Description
The Connector Interface Panel (CIP) consists of Ethernet, console, and auxiliary
connectors for the Routing Engines and alarm relay contacts (see Figure 35 on page 57).
The front electrostatic discharge point is located near the bottom of the CIP. The CIP is
located at the left side of the FPC card cage.
The CIP is hot-pluggable.
Copyright © 2010, Juniper Networks, Inc.