Juniper T1600 Hardware Manual page 307

Hide thumbs Also See for T1600:

Table of Contents

Grasp the handle on the power supply faceplate and pull firmly. Slide it halfway out

of the chassis (see Figure 166 on page 283).

CAUTION: Each three-phase delta AC power supply weighs approximately

31.0 lb. (14.06 kg). Be prepared to support the full weight of the power

supply as you remove it from the router.

Place one hand underneath the power supply to support it and slide it completely out

of the chassis.

Figure 166: Removing a Three-Phase Delta AC Power Supply

WARNING: Do not touch the power connectors on the rear of the power

supply (see Figure 167 on page 283). They can contain dangerous voltages.

Figure 167: Rear of the Power Supply Showing Midplane Connectors

Chapter 17: Replacing T1600 Router Hardware Components

Chapters

Table of Contents