Replacing The T1600 Rear Fan Tray; Removing The T1600 Rear Fan Tray - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

Replacing the T1600 Rear Fan Tray

204
Removing the T1600 Rear Fan Tray on page 204
1.
Installing the T1600 Rear Fan Tray on page 205
2.

Removing the T1600 Rear Fan Tray

The rear fan tray is mounted vertically on the right side of the rear of the chassis. The rear
fan tray contains eight fans. The fan tray weighs about 10 lb (4.5 kg).
To remove the rear fan tray (see Figure 108 on page 205):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point.
Loosen the captive screws on the top and bottom of the fan tray faceplate.
2.
Grasp the handles and pull the fan tray halfway out of the chassis.
3.
Place one hand under the fan tray to support it and pull the fan tray completely out
4.
of the chassis.
Copyright © 2010, Juniper Networks, Inc.