Reinstalling The T1600 Rear Fan Tray - Juniper T1600 Hardware Manual

T1600 Core Router Hardware Guide

Reinstalling the T1600 Rear Fan Tray

116
Reinstalling the T1600 FPCs on page 121
6.
Reinstalling T1600 Front Fan Trays on page 122
7.
8. Reinstalling the T1600 Front Cable Management System on page 123
To reinstall the standard rear fan tray (see Figure 73 on page 116):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Grasp the fan tray by its handles and insert it straight into the chassis.
2.
Tighten the captive screws on the top and bottom of the fan tray faceplate to secure
3.
it in the chassis.
Figure 73: Reinstalling the Rear Fan Tray
Copyright © 2010, Juniper Networks, Inc.