Installing A T1600 Cip - Juniper T1600 Hardware Manual

Installing a T1600 CIP

Copyright © 2010, Juniper Networks, Inc.
CAUTION: Be sure to slide the CIP straight within the slot to avoid
damaging the connector pins on the front of the midplane.
Figure 102: Removing the CIP
To install the CIP (see Figure 103 on page 195):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the site ESD points on the chassis.
Grasp the CIP handle with one hand and hold the bottom edge of the CIP with the
2.
other hand to support its weight.
Chapter 17: Replacing T1600 Router Hardware Components
193