Installing The T1600 Router Into The Rack; Overview Of Installing The T1600 Router Into The Rack - Juniper T1600 Hardware Manual

CHAPTER 8

Installing the T1600 Router into the Rack

Overview of Installing the T1600 Router into the Rack

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Overview of Installing the T1600 Router into the Rack on page 93
Read the safety information. To avoid harm to yourself or the router as you lift it into
1.
the rack, follow the guidelines and safety procedures for working with routers.
See "T1600 Chassis Lifting Guidelines" on page 316, and "General Safety Guidelines
for M Series, MX Series, and T Series Routers" on page 309.
Verify that the site has been prepared for the router installation.
2.
See "T1600 Site Preparation Requirements Checklist" on page 75.
Because of the T1600 router's size and weight—up to 606 lb (275 kg) fully
3.
configured—we strongly recommend that you lift the router into the rack using a
mechanical lift. However, if a mechanical lift is not available, you can remove
components from the chassis to make it easier to install into the rack. With components
removed, the chassis weighs approximately 225 lb (102 kg), and four people can lift
the chassis into the rack manually.
Overview of Installing a T1600 Router Using a Mechanical Lift on page 95
Overview of Installing a T1600 Router Without a Mechanical Lift on page 101
93