Enabling Customized Server-Side Policies (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Enabling Customized Server-Side Policies (NSM Procedure)

168
Table 52: IMV Server Configuration Details (continued)
Option
Port
Shared secret
Remote IMV > Remote IMVs
Name
Description
IMV Name
Primary Server
Secondary Server
Remediating Infranet Controller Host Checker Policies on page 174
Configuring Infranet Controller Host Checker Access Restrictions (NSM Procedure) on
page 67
For Windows clients, you can create global Host Checker policies that take a third-party
J.E.D.I. DLL that you upload to the Infranet Controller and run on client machines.
Function Your Action
Specifies the port number Enter a unique port number. Ensure
used by the Infranet that no other service is using this port
Controller to communicate number. The default port number is
with the remote IMV the same as the default HTTPS port
server. number.
Specifies the shared secret Enter the same shared secret used in
information. the client information entry on the
remote IMV server.
Specifies a name for the Enter a name for the remote IMVs.
remote IMV.
Describes the IMV. Enter a brief description about the
IMV.
Specifies the IMV name Enter a name for the IMV.
that matches the "human
readable name" in the
IMV's well-known registry
key on the remote IMV
server.
Specifies the primary Select the primary remote IMV server.
remote IMV server where
the IMV is installed.
Specifies the secondary Select the secondary remote IMV
remote IMV server where server.
the IMV is installed.
The secondary server acts
as a failover in case the
primary server becomes
unavailable.
Copyright © 2010, Juniper Networks, Inc.